LUMIX G9 Tether Setup Guide (Micro Four Thirds Stills Hybrid)
The Panasonic LUMIX G9 (Micro Four Thirds stills hybrid, released 2018) is fully supported by LUMIX Tether v1.3 and newer. This guide walks through the cleanest USB-C, LAN and Wi-Fi tether setup, what to expect from Live View, and the few model-specific quirks that trip people up.
What you need
- LUMIX G9 with the latest firmware
- LUMIX Tether v2.12 — grab it from the complete LUMIX Tether guide.
- USB 3.2 data-grade USB-C cable (not a charge-only cable)
- Windows 10/11 or macOS 12–15
USB-C tether (recommended)
On the G9, open Menu → Setup → IN/OUT → USB Mode → PC (Tether). Plug the cable into the camera's USB-C port and into a USB 3.x port on the laptop. Launch LUMIX Tether — the G9 appears in the device list within 2–3 seconds. Click Live View and you're shooting.
LAN tether
The G9 supports Gigabit Ethernet via the optional USB-C adapter (or natively on box bodies). Set a static IP in Wired LAN Settings, match it in LUMIX Tether's network dialog. LAN is mandatory if you want to drive multiple G9 bodies for multicam.
Wi-Fi tether
Slowest path but cable-free. Use the camera's 5 GHz mode where available — 2.4 GHz drops Live View frames in busy studios.
Direct Save and RAW workflow
Set Settings → Save Destination in LUMIX Tether to a folder Capture One or Lightroom is watching. Frames land as RAW + JPEG within ~1 second of capture on USB 3.x.
Common G9 gotchas
- If Live View is black, the camera's HDMI output is set to "External Recorder" — switch to "Tether/Monitor."
- Close LUMIX Sync on your phone first — only one remote session at a time.
- Use Photo Style "Natural" for accurate WB on the laptop preview.
More guides
Run into issues? macOS install guide. keyboard shortcuts. how to tether.