Folder-Watch Setup: LUMIX Tether → Capture One Pro
· 3 min read
Capture One Session "Capture" folder pointed at LUMIX Tether output for instant import.
Why this matters
Folder-Watch Setup: LUMIX Tether → Capture One Pro is one of those LUMIX Tether tasks that has a clean answer once you know the menu path — and that costs an hour of trial-and-error if you don't. Below is the short version.
Step-by-step
- Update LUMIX Tether to v2.12 from the Windows 11 install guide.
- Update camera firmware to the latest version (panasonic.net) — half of feature parity comes from the body, not the app.
- Open Settings in LUMIX Tether and apply the configuration described below.
- Power-cycle the USB link (close app → unplug → replug → reopen) so the new settings take effect.
- Verify with a test capture before committing to a real shoot.
Settings used
- USB Mode: PC (Tether)
- Save Destination: a watched folder for Capture One or Lightroom auto-import
- Direct Save: on, with "Record also to card" off unless a card backup is desired
- Photo Style: Natural (or V-Log if you grade downstream)
- Auto Power Off: disabled in studio
Watch-outs
The most common failure is a charge-only USB-C cable. Use a USB 3.2 Gen 2 data cable. The second most common failure is leaving LUMIX Sync open on a phone — it holds the camera and blocks the desktop session.